Skip to main content

Exclude IP from results

You can exclude visitors by entering IP addresses in the input field. Each valid entry is converted into a chip after you press Enter, type a comma, or leave the field.

The following formats are supported:

Single IP address​

Enter a standard IPv4 address (for example, 192.168.0.15). The address must be valid (each octet between 0 and 255).

IP range​

Enter a start and end IP separated by a hyphen (for example, 192.168.0.10-192.168.0.50). Both addresses must be valid IPv4 addresses. Ranges are validated numerically, so reversed ranges (where the end IP is lower than the start IP) are not allowed.

Multiple entries at once​

You can paste multiple entries at once by separating them with commas or line breaks. Each valid entry will be added as its own chip. If an entry is invalid, it will not be added and an error message will be displayed.